RIE surface texturing for optimum light trapping in multicrystalline silicon solar cells

Optical losses by reflection and transmission of the incident light should be reduced to improve the efficiency of solar cells. Compared with antireflection coatings, surface texturing is a more persistent and effective solution aiming at reducing light reflection losses. Alkali (NaOH, KOH) or acidic (HF, HNO ₃, CH ₃COOH) chemicals are used in conventional solar cell production lines for wet chemical texturing. However, Surface texturing is too difficult to apply to solar cell fabrication with thinner wafers due to the large amount of silicon loss caused by saw damage removal (SDR) and the texturing process for multicrystalline silicon (mc-Si). In order to solve the problems, reactive ion etching (RIE) has been applied for surface texturing of solar cell wafers. The RIE method can be effective in the reducing surface reflection with low silicon loss. In this study, we, therefore, fabricated a large-area (243. 3 cm ²) mc-Si solar cell by maskless surface texturing using a SF ₆/O ₂ RIE process. Also, we achieved a conversion efficiency (Eff), open circuit voltage (V _oc), short circuit current density (Jsc) and fill factor (FF) as high as 17. 2%, 616 mV, 35. 1 mA/cm ², and 79. 6%, respectively, which are suitable for fabricating thin crystalline silicon solar cells at low cost and with high efficiency.