Rational design of CN substituted dibenzo[a,c]phenazine acceptor for color tuning of thermally activated delayed fluorescent emitters

Thermally activated delayed fluorescent (TADF) emitters with emission wavelength beyond 600 nm and high external quantum efficiency (EQE) above 20 % are rarely reported because of the inherent limitation of the energy gap law. Rigid and planar dibenzo[a,c]phenazine (BP) core was proven to be a useful acceptor to develop highly efficient red TADF emitters by minimizing non-radiative loss mechanism. In this work, by varying the number and substitution position of donor/acceptor unit attached to the BP acceptor, four long wavelength TADF emitters (3-AcBPmCN, 3-AcBPdCN, 3-AcBPtCN and 11-ACBPdCN) were developed to control the emission wavelength from yellow (552 nm) to deep-red (637 nm) region. A directly attached 9,9-dimethyl-9,10-dihydroacridine (Ac) donor and newly developed 3-CNBP, 11,12-CNBP, 3,11,12-CNBP and 3,6-CNBP acceptor units were utilized in the synthesis of TADF emitters of 3-AcBPmCN, 3-AcBPdCN, 3-AcBPtCN and 11-AcBPdCN respectively. With the increasing number of cyano units on BP acceptor, decreased HOMO-LUMO energy gap and singlet–triplet energy gap (ΔE_ST) were reported for three TADF emitters of 3-AcBPmCN, 3-AcBPdCN and 3-AcBPtCN. Further, it was demonstrated that in between the two donor-substitution positions of BP acceptor (3 and 11), 11-position substituted 11-AcBPdCN TADF emitter exhibited higher EQE (23.1 %) than the 3-position substituted 3-AcBPdCN TADF emitter (17.3 %) with the similar color coordinate (0.53, 0.46).