Pulsed electrodeposition of palladium nanowire arrays using AAO template

Kyungtae Kim; Moonjung Kim; Sung M. Cho

doi:10.1016/j.matchemphys.2005.07.013

Pulsed electrodeposition of palladium nanowire arrays using AAO template

Kyungtae Kim
, Moonjung Kim
, Sung M. Cho

Department of Chemical Engineering

Sungkyunkwan University

Research output: Contribution to journal › Article › peer-review

97 Scopus citations

Abstract

Highly ordered palladium (Pd) nanowire arrays were successfully prepared by pulsed electrodeposition (PED) method using anodized aluminum oxide (AAO) nanotemplate. The Pd nanowire arrays are standing freely on a titanium-coated silicon wafer after removing the AAO template. The titanium film is used for providing conducting surface for the electrodeposition of palladium and also for removing alumina barrier layer formed as a result of the anodization of aluminum film. The diameter and length of the palladium nanowire in the arrays are about 80 nm and 0.8 μm, respectively. It has been shown that the well-ordered and free-standing Pd nanowire arrays can be grown uniformly in a relatively large area of about 5 cm².

Original language	English
Pages (from-to)	278-282
Number of pages	5
Journal	Materials Chemistry and Physics
Volume	96
Issue number	2-3
DOIs	https://doi.org/10.1016/j.matchemphys.2005.07.013
State	Published - 10 Apr 2006

Keywords

AAO templates
Electrodeposition
Nanowire arrays
Palladium

Access to Document

10.1016/j.matchemphys.2005.07.013

Cite this

@article{1df6717d7f50401fbad1633c3c482f1f,

title = "Pulsed electrodeposition of palladium nanowire arrays using AAO template",

abstract = "Highly ordered palladium (Pd) nanowire arrays were successfully prepared by pulsed electrodeposition (PED) method using anodized aluminum oxide (AAO) nanotemplate. The Pd nanowire arrays are standing freely on a titanium-coated silicon wafer after removing the AAO template. The titanium film is used for providing conducting surface for the electrodeposition of palladium and also for removing alumina barrier layer formed as a result of the anodization of aluminum film. The diameter and length of the palladium nanowire in the arrays are about 80 nm and 0.8 μm, respectively. It has been shown that the well-ordered and free-standing Pd nanowire arrays can be grown uniformly in a relatively large area of about 5 cm2.",

keywords = "AAO templates, Electrodeposition, Nanowire arrays, Palladium",

author = "Kyungtae Kim and Moonjung Kim and Cho, \{Sung M.\}",

year = "2006",

month = apr,

day = "10",

doi = "10.1016/j.matchemphys.2005.07.013",

language = "English",

volume = "96",

pages = "278--282",

journal = "Materials Chemistry and Physics",

issn = "0254-0584",

publisher = "Elsevier B.V.",

number = "2-3",

}

TY - JOUR

T1 - Pulsed electrodeposition of palladium nanowire arrays using AAO template

AU - Kim, Kyungtae

AU - Kim, Moonjung

AU - Cho, Sung M.

PY - 2006/4/10

Y1 - 2006/4/10

N2 - Highly ordered palladium (Pd) nanowire arrays were successfully prepared by pulsed electrodeposition (PED) method using anodized aluminum oxide (AAO) nanotemplate. The Pd nanowire arrays are standing freely on a titanium-coated silicon wafer after removing the AAO template. The titanium film is used for providing conducting surface for the electrodeposition of palladium and also for removing alumina barrier layer formed as a result of the anodization of aluminum film. The diameter and length of the palladium nanowire in the arrays are about 80 nm and 0.8 μm, respectively. It has been shown that the well-ordered and free-standing Pd nanowire arrays can be grown uniformly in a relatively large area of about 5 cm2.

AB - Highly ordered palladium (Pd) nanowire arrays were successfully prepared by pulsed electrodeposition (PED) method using anodized aluminum oxide (AAO) nanotemplate. The Pd nanowire arrays are standing freely on a titanium-coated silicon wafer after removing the AAO template. The titanium film is used for providing conducting surface for the electrodeposition of palladium and also for removing alumina barrier layer formed as a result of the anodization of aluminum film. The diameter and length of the palladium nanowire in the arrays are about 80 nm and 0.8 μm, respectively. It has been shown that the well-ordered and free-standing Pd nanowire arrays can be grown uniformly in a relatively large area of about 5 cm2.

KW - AAO templates

KW - Electrodeposition

KW - Nanowire arrays

KW - Palladium

UR - https://www.scopus.com/pages/publications/31644444494

U2 - 10.1016/j.matchemphys.2005.07.013

DO - 10.1016/j.matchemphys.2005.07.013

M3 - Article

AN - SCOPUS:31644444494

SN - 0254-0584

VL - 96

SP - 278

EP - 282

JO - Materials Chemistry and Physics

JF - Materials Chemistry and Physics

IS - 2-3

ER -

Pulsed electrodeposition of palladium nanowire arrays using AAO template

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this