Novel analysis and design methodology of interior permanent-magnet synchronous motor using newly adopted synthetic flux linkage

Seungho Lee; Yu Seok Jeong; Yong Jae Kim; Sang Yong Jung

doi:10.1109/TIE.2010.2093479

Novel analysis and design methodology of interior permanent-magnet synchronous motor using newly adopted synthetic flux linkage

Seungho Lee
, Yu Seok Jeong
, Yong Jae Kim
, Sang Yong Jung

Dong-A University
Myongji University
Chosun University

Research output: Contribution to journal › Article › peer-review

47 Scopus citations

Abstract

Novel analysis and design methodology using the newly adopted synthetic flux linkage for interior permanent-magnet (PM) synchronous motors (IPMSMs) with a multilayered PM have been proposed. In addition, cross magnetization between the d and q axes in the IPMSM is taken into account via the proposed synthetic flux linkage, which can be identified numerically and experimentally. It is validated with the experimental ones for the purposely built prototype, and its further effectiveness on control application is introduced.

Original language	English
Article number	5640667
Pages (from-to)	3806-3814
Number of pages	9
Journal	IEEE Transactions on Industrial Electronics
Volume	58
Issue number	9
DOIs	https://doi.org/10.1109/TIE.2010.2093479
State	Published - Sep 2011
Externally published	Yes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Cross magnetization
interior permanent-magnet (PM) synchronous motor (IPMSM)
multilayered PM
synthetic flux linkage

Access to Document

10.1109/TIE.2010.2093479

Cite this

@article{d52586b49b0f4511afee1fd0b15dab89,

title = "Novel analysis and design methodology of interior permanent-magnet synchronous motor using newly adopted synthetic flux linkage",

abstract = "Novel analysis and design methodology using the newly adopted synthetic flux linkage for interior permanent-magnet (PM) synchronous motors (IPMSMs) with a multilayered PM have been proposed. In addition, cross magnetization between the d and q axes in the IPMSM is taken into account via the proposed synthetic flux linkage, which can be identified numerically and experimentally. It is validated with the experimental ones for the purposely built prototype, and its further effectiveness on control application is introduced.",

keywords = "Cross magnetization, interior permanent-magnet (PM) synchronous motor (IPMSM), multilayered PM, synthetic flux linkage",

author = "Seungho Lee and Jeong, \{Yu Seok\} and Kim, \{Yong Jae\} and Jung, \{Sang Yong\}",

year = "2011",

month = sep,

doi = "10.1109/TIE.2010.2093479",

language = "English",

volume = "58",

pages = "3806--3814",

journal = "IEEE Transactions on Industrial Electronics",

issn = "0278-0046",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "9",

}

TY - JOUR

T1 - Novel analysis and design methodology of interior permanent-magnet synchronous motor using newly adopted synthetic flux linkage

AU - Lee, Seungho

AU - Jeong, Yu Seok

AU - Kim, Yong Jae

AU - Jung, Sang Yong

PY - 2011/9

Y1 - 2011/9

N2 - Novel analysis and design methodology using the newly adopted synthetic flux linkage for interior permanent-magnet (PM) synchronous motors (IPMSMs) with a multilayered PM have been proposed. In addition, cross magnetization between the d and q axes in the IPMSM is taken into account via the proposed synthetic flux linkage, which can be identified numerically and experimentally. It is validated with the experimental ones for the purposely built prototype, and its further effectiveness on control application is introduced.

AB - Novel analysis and design methodology using the newly adopted synthetic flux linkage for interior permanent-magnet (PM) synchronous motors (IPMSMs) with a multilayered PM have been proposed. In addition, cross magnetization between the d and q axes in the IPMSM is taken into account via the proposed synthetic flux linkage, which can be identified numerically and experimentally. It is validated with the experimental ones for the purposely built prototype, and its further effectiveness on control application is introduced.

KW - Cross magnetization

KW - interior permanent-magnet (PM) synchronous motor (IPMSM)

KW - multilayered PM

KW - synthetic flux linkage

UR - https://www.scopus.com/pages/publications/80051769298

U2 - 10.1109/TIE.2010.2093479

DO - 10.1109/TIE.2010.2093479

M3 - Article

AN - SCOPUS:80051769298

SN - 0278-0046

VL - 58

SP - 3806

EP - 3814

JO - IEEE Transactions on Industrial Electronics

JF - IEEE Transactions on Industrial Electronics

IS - 9

M1 - 5640667

ER -

Novel analysis and design methodology of interior permanent-magnet synchronous motor using newly adopted synthetic flux linkage

Abstract

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this