ITO: Zr bi-layers deposited by reactive O₂ and Ar plasma with high work function for silicon heterojunction solar cells

We report the influence of reactive oxygen (O₂) and argon (Ar) plasma based ITO:Zr bi-layers for silicon heterojunction (SHJ) solar cells. The purpose of reactive O₂ sputtered ITO:Zr was to improve the Hall mobility and work function while the Ar based ITO:Zr films play an important role to maintain good electrical characteristics. The thickness of reactive O₂ based ITO:Zr films was fixed at 15 nm while Ar based films was varied from 65 to 125 nm, respectively. ITO:Zr bi-layers with the thickness of 15/105 nm deposited by O₂ and Ar plasma, respectively, showed lowest resistivity of 2.358 × 10⁻⁴ Ω cm and high Hall mobility of 39.3 cm²/V · s. All ITO:Zr bi-layers showed an average transmittance of above 80% in the visible wavelength (380–800 nm) region. Work function of ITO:Zr bi-layers was calculated from the X-ray photoelectron spectroscopic (XPS) data. The ITO:Zr work function was enhanced from 5.3 eV to 5.16 eV with the variation of ITO:Zr bi-layers from 15/65 to 15/125 nm, respectively. Front barrier height in SHJ solar cells can be modified by using TCO films with high work function. The SHJ solar cells were fabricated by employing the ITO:Zr bi-layer as front anti-reflection coating. The SHJ solar cells fabricated on ITO:Zr bi-layer with the thickness of 15/105 nm showed the best photo-voltage parameters as; V_oc = 739 mV, J_sc = 39.12 mA/cm², FF = 75.97%, η = 21.96%.