Abstract
Silver (Ag) nanoparticles were formed on fluorine-doped tin oxide (FTO) coated glass substrate, and then hydrogenated amorphous silicon (a-Si:H) thin-film solar cells were sequentially fabricated. Ag nanoparticles located in the interface between the FTO and the p-layer leads to a light-trapping effect because of the strong light-material interaction in Ag nanoparticles and enhancement of the optical path length. A higher haze ratio appeared for Ag nanoparticles with larger diameters and heights, compared with the conventional type. The device with the Ag nanoparticles showed a short-circuit current density of 12.66 mA cm-2, which was 2.2 mA cm-2 higher than the device without Ag nanoparticles. Conversion efficiency increased from 4.9 % to 5.9 % by employing Ag nanoparticles with a roughness of 71 nm. The simple process makes our design useful for low-cost, high conversion efficiency thin-film solar cells.
| Original language | English |
|---|---|
| Pages (from-to) | 1103-1108 |
| Number of pages | 6 |
| Journal | Israel Journal of Chemistry |
| Volume | 55 |
| Issue number | 10 |
| DOIs | |
| State | Published - 1 Oct 2015 |
UN SDGs
This output contributes to the following UN Sustainable Development Goals (SDGs)
-
SDG 7 Affordable and Clean Energy
Keywords
- light trapping
- nanoparticles
- plasmonic
- silver
- thin-film solar cells
Fingerprint
Dive into the research topics of 'Improvement of a-Si:H Thin-film Solar Cells by Employing Large Ag Nanoparticles'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver