High-Mobility and Hysteresis-Free Flexible Oxide Thin-Film Transistors and Circuits by Using Bilayer Sol-Gel Gate Dielectrics

  • Jeong Wan Jo
  • , Kwang Ho Kim
  • , Jaeyoung Kim
  • , Seok Gyu Ban
  • , Yong Hoon Kim
  • , Sung Kyu Park

Research output: Contribution to journalArticlepeer-review

Abstract

In this paper, we demonstrate high-performance and hysteresis-free solution-processed indium-gallium-zinc oxide (IGZO) thin-film transistors (TFTs) and high-frequency-operating seven-stage ring oscillators using a low-temperature photochemically activated Al2O3/ZrO2 bilayer gate dielectric. It was found that the IGZO TFTs with single-layer gate dielectrics such as Al2O3, ZrO2, or sodium-doped Al2O3 exhibited large hysteresis, low field-effect mobility, or unstable device operation owing to the interfacial/bulk trap states, insufficient band offset, or a substantial number of mobile ions present in the gate dielectric layer, respectively. To resolve these issues and to explain the underlying physical mechanisms, a series of electrical analyses for various single- and bilayer gate dielectrics was carried out. It is shown that compared to single-layer gate dielectrics, the Al2O3/ZrO2 gate dielectric exhibited a high dielectric constant of 8.53, low leakage current density (-10-9 A cm-2 at 1 MV cm-1), and stable operation at high frequencies. Using the photochemically activated Al2O3/ZrO2 gate dielectric, the seven-stage ring oscillators operating at an oscillation frequency of 334 kHz with a propagation delay of <216 ns per stage were successfully demonstrated on a polymeric substrate.

Original languageEnglish
Pages (from-to)2679-2687
Number of pages9
JournalACS Applied Materials and Interfaces
Volume10
Issue number3
DOIs
StatePublished - 24 Jan 2018
Externally publishedYes

Keywords

  • bilayer
  • flexible electronics
  • hysteresis-free
  • oxide gate dielectric
  • photochemical activation

Fingerprint

Dive into the research topics of 'High-Mobility and Hysteresis-Free Flexible Oxide Thin-Film Transistors and Circuits by Using Bilayer Sol-Gel Gate Dielectrics'. Together they form a unique fingerprint.

Cite this