High efficiency point-of-load and bus converter system using built-in converters

Won Yong Sung; Chang Yeol Oh; Jung Hoon Ahn; Byoung Kuk Lee; Yun Sung Kim

doi:10.1109/ECCE.2014.6953667

High efficiency point-of-load and bus converter system using built-in converters

Won Yong Sung
, Chang Yeol Oh
, Jung Hoon Ahn
, Byoung Kuk Lee
, Yun Sung Kim

Department of Electronic and Electrical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

This paper proposes a new type of built-in point-of-load (POL) reduces switching losses without the additional components. The proposed circuit can carry out the zero voltage switching of MOSFET of the POL for the duty loss by resonance in resonant bus converter. In order to verify the performance and the validity of the proposed structure, simulation is carried out. And the prototype rated with 200W was built and experimental results are carried out.

Original language	English
Title of host publication	2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	2013-2017
Number of pages	5
ISBN (Electronic)	9781479956982
DOIs	https://doi.org/10.1109/ECCE.2014.6953667
State	Published - 11 Nov 2014

Publication series

Name	2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014

Access to Document

10.1109/ECCE.2014.6953667

Cite this

Sung, W. Y., Oh, C. Y., Ahn, J. H., Lee, B. K., & Kim, Y. S. (2014). High efficiency point-of-load and bus converter system using built-in converters. In 2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014 (pp. 2013-2017). Article 6953667 (2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ECCE.2014.6953667

@inproceedings{01c234b7ab394ff1b7004ba2ca128c84,

title = "High efficiency point-of-load and bus converter system using built-in converters",

abstract = "This paper proposes a new type of built-in point-of-load (POL) reduces switching losses without the additional components. The proposed circuit can carry out the zero voltage switching of MOSFET of the POL for the duty loss by resonance in resonant bus converter. In order to verify the performance and the validity of the proposed structure, simulation is carried out. And the prototype rated with 200W was built and experimental results are carried out.",

author = "Sung, \{Won Yong\} and Oh, \{Chang Yeol\} and Ahn, \{Jung Hoon\} and Lee, \{Byoung Kuk\} and Kim, \{Yun Sung\}",

note = "Publisher Copyright: {\textcopyright} 2014 IEEE.",

year = "2014",

month = nov,

day = "11",

doi = "10.1109/ECCE.2014.6953667",

language = "English",

series = "2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "2013--2017",

booktitle = "2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014",

}

Sung, WY, Oh, CY, Ahn, JH, Lee, BK & Kim, YS 2014, High efficiency point-of-load and bus converter system using built-in converters. in 2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014., 6953667, 2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014, Institute of Electrical and Electronics Engineers Inc., pp. 2013-2017. https://doi.org/10.1109/ECCE.2014.6953667

High efficiency point-of-load and bus converter system using built-in converters. / Sung, Won Yong; Oh, Chang Yeol; Ahn, Jung Hoon et al.
2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014. Institute of Electrical and Electronics Engineers Inc., 2014. p. 2013-2017 6953667 (2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - High efficiency point-of-load and bus converter system using built-in converters

AU - Sung, Won Yong

AU - Oh, Chang Yeol

AU - Ahn, Jung Hoon

AU - Lee, Byoung Kuk

AU - Kim, Yun Sung

PY - 2014/11/11

Y1 - 2014/11/11

N2 - This paper proposes a new type of built-in point-of-load (POL) reduces switching losses without the additional components. The proposed circuit can carry out the zero voltage switching of MOSFET of the POL for the duty loss by resonance in resonant bus converter. In order to verify the performance and the validity of the proposed structure, simulation is carried out. And the prototype rated with 200W was built and experimental results are carried out.

AB - This paper proposes a new type of built-in point-of-load (POL) reduces switching losses without the additional components. The proposed circuit can carry out the zero voltage switching of MOSFET of the POL for the duty loss by resonance in resonant bus converter. In order to verify the performance and the validity of the proposed structure, simulation is carried out. And the prototype rated with 200W was built and experimental results are carried out.

UR - https://www.scopus.com/pages/publications/84934325048

U2 - 10.1109/ECCE.2014.6953667

DO - 10.1109/ECCE.2014.6953667

M3 - Conference contribution

AN - SCOPUS:84934325048

T3 - 2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014

SP - 2013

EP - 2017

BT - 2014 IEEE Energy Conversion Congress and Exposition, ECCE 2014

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

High efficiency point-of-load and bus converter system using built-in converters

Abstract

Publication series

Access to Document

Other files and links

Fingerprint

Cite this