Fast release process of metal structure using chemical dry etching of sacrificial Si layer

An ultra-fast removal process of a silicon sacrificial layer for the selective release of a metal structure on a Si substrate was studied, which uses a chemical dry etching method. The chemical dry etching of a Si layer was performed in an NF₃ remote plasma with the direct injection of additive nitric oxide (NO) gas. When the NO gas was injected into the chamber into which F radicals were supplied from a remote plasma source using NF ₃ input gas, the silicon layer was removed selectively and the metal structure could be released easily. It was found that the etch rate on the sidewall (up to ≅ 18.7 μm/min for an opening width of 100 μm) and the bottom (up to ≅ 24.5 μm/min for an opening width of 100 μm) depends on the NO/(NO + Ar) gas flow ratio, time duration, and opening width. The developed dry etching process could be used to release a Ni structure with near infinite selectivity in a very short time. The process is well suited for fabricating various devices which require a suspended structure, such as in radio-frequency microelectromechanical system switches, tunable capacitors, high-Q suspended inductors and suspended-gate metal-oxide semiconductor field-effect transistors.