Skip to main navigation Skip to search Skip to main content

Facile self-assembled monolayer deposition on copper foil for high-performance lithium-metal batteries

  • Oh B. Chae
  • , Suhyun Lee
  • , Jun Hwa Park
  • , Cheol Hwan Song
  • , Nakgyu Go
  • , Daon Lee
  • , Jiyun Kim
  • , Fuhui Jin
  • , Yeong Don Park
  • , Junyoung Mun
  • Gachon University
  • Incheon National University
  • Sungkyunkwan University

Research output: Contribution to journal › Article › peer-review

Abstract

Li metal is widely acknowledged as the optimal negative electrode material for high-energy-density Li rechargeable batteries. However, challenges arise owing to the formation of Li dendrites and poor surface stability, leading to reduced cycle life and energy efficiency, thereby limiting widespread application. In this study, we introduced a novel approach of a molecular single-layer surface modification onto a Cu foil using a self-assembled monolayer with hexamethyldisilane (HMDS) to enhance the performance of Li-metal electrodes. The deposition of a single molecular layer at the Å-level was achieved by a simple combination of precursor casting and heat treatment without greatly affecting the energy and power density. Furthermore, this process was both scalable and cost-effective, making it highly suitable for large-scale battery manufacturing. The molecular deposition of HMDS effectively mitigated electrolyte decomposition and promoted uniform Li deposition by enhancing the surface stability under repeated Li plating–stripping processes. Optical microscopy revealed the homogeneous Li plating even after extended cycling; the first cycle on the modified surface depicted uniform plating without blank spots owing to the reduced gas-phase by-products from electrolyte decomposition. Thus, HMDS modification greatly improved the cycle stability of Li-metal batteries by successfully mitigating polarization due to electrolyte decomposition. Such improvement improved the Coulombic efficiencies and enhanced the energy efficiency, especially over a wide current density range of 1–5 mA cm−2. Furthermore, full cells with LiFePO4 cathodes and HMDS-modified Cu foils exhibited extended cyclability with increased energy efficiencies.

Original languageEnglish
Article number145154
JournalElectrochimica Acta
Volume507
DOIs
StatePublished - 10 Dec 2024

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy
  2. SDG 9 - Industry, Innovation, and Infrastructure
    SDG 9 Industry, Innovation, and Infrastructure

Keywords

  • Cu current collector
  • Hexamethyldisilane
  • Li dendrite
  • Li metal batteries
  • Self-assembled monolayer

Fingerprint

Dive into the research topics of 'Facile self-assembled monolayer deposition on copper foil for high-performance lithium-metal batteries'. Together they form a unique fingerprint.

Cite this