Epitaxial growth of cubic SiC thin films on silicon using single molecular precursors by metalorganic chemical vapor deposition

  • J. H. Boo
  • , S. B. Lee
  • , K. W. Lee
  • , K. S. yu
  • , Y. Kim
  • , S. H. Yeon
  • , I. N. Jung

Research output: Contribution to journalArticlepeer-review

Abstract

Heteroepitaxial cubic SiC thin films have been deposited on silicon substrates at temperatures in the range of 750–1000 °C using single molecular precursors by the metalorganic chemical vapor deposition (CVD) method. Single-crystalline, crack-free, stoichiometric cubic SiC films were successfully grown on both Si(001) and Si(111) substrates without surface carbonization at as low as temperature of 920 °C with 1,3-disilabutane, [formula omitted] as a liquid single source precursor which contains silicon and carbon in 1:1 ratio. Cubic SiC thin films highly oriented in the [001] direction were also obtained on Si(001) using either a liquid mixture of 1,3,5-trisilapentane (TSP), [formula omitted] and 2,4,6-trisilaheptane (TSH) at 980 °C or 2,6-dimethyl-2,4,6-trisilaheptane (DMTSH), [formula omitted] at 950 °C without carrier gas. These growth temperatures were much lower than conventional CVD growth temperatures, and this is a report of cubic SiC film growth using the single molecular precursors of trisilaalkanes (i.e., DMTSH and [formula omitted] The as-grown SiC films were characterized by in situ reflection high-energy electron diffraction and by ex situ x-ray diffraction, transmission electron diffraction, scanning electron microscopy, Auger electron spectroscopy, and Rutherford backscattering spectroscopy.

Original languageEnglish
Pages (from-to)1887-1893
Number of pages7
JournalJournal of Vacuum Science and Technology A: Vacuum, Surfaces and Films
Volume19
Issue number4
DOIs
StatePublished - Jul 2001

Keywords

  • SiC

Fingerprint

Dive into the research topics of 'Epitaxial growth of cubic SiC thin films on silicon using single molecular precursors by metalorganic chemical vapor deposition'. Together they form a unique fingerprint.

Cite this