Skip to main navigation Skip to search Skip to main content

Effects of hydrogen incorporation and heat treatment on the properties of ZnO:Al films deposited on polymer substrate for flexible solar cell applications

  • Kunsan National University

Research output: Contribution to journal › Article › peer-review

Abstract

Aluminum doped zinc oxide (AZO) films incorporated with hydrogen were prepared by r.f. magnetron sputtering. The hydrogen content in the films was controlled by changing hydrogen gas ratio to argon gas. The influence of the hydrogen doping on the structural, electrical and optical properties of AZO film were investigated. Hydrogen introduction was demonstrated to enhance both crystallinity and conductivity of the films. The optimum value of H 2/(Ar + H2) ratio was observed to be 2.5%. Heat treatment in hydrogen atmosphere did not affect highly the optical transmittance of AZO films grown in pure argon gas. The conductivity of AZO films became wore when post-annealed at high temperature, regardless of substrate types.

Original languageEnglish
Pages (from-to)S515-S519
JournalCurrent Applied Physics
Volume10
Issue numberSUPPL. 3
DOIs
StatePublished - 2010
Externally publishedYes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • Aluminum doped zinc oxide (AZO)
  • Hydrogen incorporation
  • Solar cell
  • Transparent conductive oxide (TCO)

Fingerprint

Dive into the research topics of 'Effects of hydrogen incorporation and heat treatment on the properties of ZnO:Al films deposited on polymer substrate for flexible solar cell applications'. Together they form a unique fingerprint.

Cite this