Skip to main navigation Skip to search Skip to main content

Determination of electrical types in the P-doped ZnO thin films by the control of ambient gas flow

  • Sungkyunkwan University

Research output: Contribution to journal › Article › peer-review

Abstract

Phosphorus (P)-doped ZnO thin films with amphoteric doping behavior were grown on c-sapphire substrates by radio frequency magnetron sputtering with various argon/oxygen gas ratios. Control of the electrical types in the P-doped ZnO films was achieved by varying the gas ratio without post-annealing. The P-doped ZnO films grown at a argon/oxygen ratio of 3/1 showed p-type conductivity with a hole concentration and hole mobility of 1.5 × 10 17 cm -3 and 2.5 cm 2 /V s, respectively. X-ray diffraction showed that the ZnO (0 0 0 2) peak shifted to lower angle due to the positioning of P 3- ions with a larger ionic radius in the O 2- sites. This indicates that a p-type mechanism was due to the substitutional P O . The low-temperature photoluminescence of the p-type ZnO films showed p-type related neutral acceptor-bound exciton emission. The p-ZnO/n-Si heterojunction light emitting diode showed typical rectification behavior, which confirmed the p-type characteristics of the ZnO films in the as-deposited status, despite the deep-level related electroluminescence emission.

Original languageEnglish
Pages (from-to)4438-4441
Number of pages4
JournalApplied Surface Science
Volume256
Issue number14
DOIs
StatePublished - 1 May 2010

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • Amphoteric doping
  • p-Type
  • Sputtering
  • Zinc oxide

Fingerprint

Dive into the research topics of 'Determination of electrical types in the P-doped ZnO thin films by the control of ambient gas flow'. Together they form a unique fingerprint.

Cite this