Design of 10 MEV cyclotron accelerator

R. Solhju; M. R. Asadi; S. Sabounchi; F. Zaker Hosseini; M. Salehi; A. Abdorrahman; M. Nikbakht; Z. Karrari; H. Afarideh; M. Ghergherehchi

doi:10.18869/ACADPUB.IJPR.15.2.225

Design of 10 MEV cyclotron accelerator

R. Solhju, M. R. Asadi, S. Sabounchi, F. Zaker Hosseini, M. Salehi, A. Abdorrahman, M. Nikbakht, Z. Karrari, H. Afarideh, M. Ghergherehchi

Amirkabir University of Technology

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

Abstract

Design and construction of 10MeV cyclotron has been started at Amirkabir University of Technology since 2012. So far, the conceptual and detail engineering design phases have been finalized. The main purpose of this baby cyclotron is to generate proton beam for the production of PET radioisotopes. The cyclotron consists of magnet, cavity, ion source, RF and LLRF system, vacuum system, cooling system, power amplifiers and power supplies system. In this paper, a brief of design principles for all the parts of cyclotron and their final simulation results is presented. It should be noted that these simulations have been performed and optimized by the most accurate softwares such as TOSCA, ANSYS, HFSS, Solid Works and CST. Also, the manufacturing feasibility of all the parts is performed and their dimensions and parameters are synchronized with manufacturing standards.

Original language	English
Pages (from-to)	225-234
Number of pages	10
Journal	Iranian Journal of Physics Research
Volume	15
Issue number	2
DOIs	https://doi.org/10.18869/ACADPUB.IJPR.15.2.225
State	Published - 1 Jun 2015
Externally published	Yes

Keywords

Accelerator
Cavity
Cyclotron
Magnet
PIG ion source
RF system
TOSCA software

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.18869/ACADPUB.IJPR.15.2.225

Cite this

@article{bd935b3bbeb04701835c5f8adcf721be,

title = "Design of 10 MEV cyclotron accelerator",

abstract = "Design and construction of 10MeV cyclotron has been started at Amirkabir University of Technology since 2012. So far, the conceptual and detail engineering design phases have been finalized. The main purpose of this baby cyclotron is to generate proton beam for the production of PET radioisotopes. The cyclotron consists of magnet, cavity, ion source, RF and LLRF system, vacuum system, cooling system, power amplifiers and power supplies system. In this paper, a brief of design principles for all the parts of cyclotron and their final simulation results is presented. It should be noted that these simulations have been performed and optimized by the most accurate softwares such as TOSCA, ANSYS, HFSS, Solid Works and CST. Also, the manufacturing feasibility of all the parts is performed and their dimensions and parameters are synchronized with manufacturing standards.",

keywords = "Accelerator, Cavity, Cyclotron, Magnet, PIG ion source, RF system, TOSCA software",

author = "R. Solhju and Asadi, \{M. R.\} and S. Sabounchi and Hosseini, \{F. Zaker\} and M. Salehi and A. Abdorrahman and M. Nikbakht and Z. Karrari and H. Afarideh and M. Ghergherehchi",

year = "2015",

month = jun,

day = "1",

doi = "10.18869/ACADPUB.IJPR.15.2.225",

language = "English",

volume = "15",

pages = "225--234",

journal = "Iranian Journal of Physics Research",

issn = "1682-6957",

publisher = "Isfahan University of Technology",

number = "2",

}

TY - JOUR

T1 - Design of 10 MEV cyclotron accelerator

AU - Solhju, R.

AU - Asadi, M. R.

AU - Sabounchi, S.

AU - Hosseini, F. Zaker

AU - Salehi, M.

AU - Abdorrahman, A.

AU - Nikbakht, M.

AU - Karrari, Z.

AU - Afarideh, H.

AU - Ghergherehchi, M.

PY - 2015/6/1

Y1 - 2015/6/1

N2 - Design and construction of 10MeV cyclotron has been started at Amirkabir University of Technology since 2012. So far, the conceptual and detail engineering design phases have been finalized. The main purpose of this baby cyclotron is to generate proton beam for the production of PET radioisotopes. The cyclotron consists of magnet, cavity, ion source, RF and LLRF system, vacuum system, cooling system, power amplifiers and power supplies system. In this paper, a brief of design principles for all the parts of cyclotron and their final simulation results is presented. It should be noted that these simulations have been performed and optimized by the most accurate softwares such as TOSCA, ANSYS, HFSS, Solid Works and CST. Also, the manufacturing feasibility of all the parts is performed and their dimensions and parameters are synchronized with manufacturing standards.

AB - Design and construction of 10MeV cyclotron has been started at Amirkabir University of Technology since 2012. So far, the conceptual and detail engineering design phases have been finalized. The main purpose of this baby cyclotron is to generate proton beam for the production of PET radioisotopes. The cyclotron consists of magnet, cavity, ion source, RF and LLRF system, vacuum system, cooling system, power amplifiers and power supplies system. In this paper, a brief of design principles for all the parts of cyclotron and their final simulation results is presented. It should be noted that these simulations have been performed and optimized by the most accurate softwares such as TOSCA, ANSYS, HFSS, Solid Works and CST. Also, the manufacturing feasibility of all the parts is performed and their dimensions and parameters are synchronized with manufacturing standards.

KW - Accelerator

KW - Cavity

KW - Cyclotron

KW - Magnet

KW - PIG ion source

KW - RF system

KW - TOSCA software

UR - https://www.scopus.com/pages/publications/85052804753

U2 - 10.18869/ACADPUB.IJPR.15.2.225

DO - 10.18869/ACADPUB.IJPR.15.2.225

M3 - Article

AN - SCOPUS:85052804753

SN - 1682-6957

VL - 15

SP - 225

EP - 234

JO - Iranian Journal of Physics Research

JF - Iranian Journal of Physics Research

IS - 2

ER -

Design of 10 MEV cyclotron accelerator

Abstract

Keywords

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this