Characteristics of organic electroluminescent devices using polypyrrole conducting layer

Jong Wook Park; Jun Young Lee; Sam Ill Kho; Ho Sik Lee; Tae Wan Kim

doi:10.1016/S0379-6779(00)00550-6

Characteristics of organic electroluminescent devices using polypyrrole conducting layer

Jong Wook Park
, Jun Young Lee
, Sam Ill Kho
, Ho Sik Lee
, Tae Wan Kim

Department of Chemical Engineering

Research output: Contribution to journal › Article › peer-review

12 Scopus citations

Abstract

We observed EL properties based on PVK, poly(3,6-N-2-ethylhexyl carbazolyl cyanoterephthalidene) (PECCP) and Alq3 emitting material devices with doped PPy conducting layer (>5 S/cm) and undoped polyacetylene derivative layer (PEPB, 10^-10-10^-11 S/cm) on top of rough ITO (surface resistance: less than 7Ω/□). PPy conducting layer improved an EL efficiency of ITO/TPD/Alq3/Al device, which has a rough ITO surface of more than 1000 angstroms peak to peak level. In PVK, PECCP EML device, when PPy is layered on top of ITO, the turn-on voltage is lowered from 13 to 10 V and from 15 to 9 V, respectively. The conductivity of undoped PEPB film is too low to improve EL property though it has good smoothness.

Original language	English
Pages (from-to)	119-122
Number of pages	4
Journal	Synthetic Metals
Volume	117
Issue number	1-3
DOIs	https://doi.org/10.1016/S0379-6779(00)00550-6
State	Published - 15 Feb 2001

Access to Document

10.1016/S0379-6779(00)00550-6

Cite this

@article{1ef3355697c340bcbe29493e5eaf8293,

title = "Characteristics of organic electroluminescent devices using polypyrrole conducting layer",

abstract = "We observed EL properties based on PVK, poly(3,6-N-2-ethylhexyl carbazolyl cyanoterephthalidene) (PECCP) and Alq3 emitting material devices with doped PPy conducting layer (>5 S/cm) and undoped polyacetylene derivative layer (PEPB, 10-10-10-11 S/cm) on top of rough ITO (surface resistance: less than 7Ω/□). PPy conducting layer improved an EL efficiency of ITO/TPD/Alq3/Al device, which has a rough ITO surface of more than 1000 angstroms peak to peak level. In PVK, PECCP EML device, when PPy is layered on top of ITO, the turn-on voltage is lowered from 13 to 10 V and from 15 to 9 V, respectively. The conductivity of undoped PEPB film is too low to improve EL property though it has good smoothness.",

author = "Park, \{Jong Wook\} and Lee, \{Jun Young\} and Kho, \{Sam Ill\} and Lee, \{Ho Sik\} and Kim, \{Tae Wan\}",

year = "2001",

month = feb,

day = "15",

doi = "10.1016/S0379-6779(00)00550-6",

language = "English",

volume = "117",

pages = "119--122",

journal = "Synthetic Metals",

issn = "0379-6779",

publisher = "Elsevier B.V.",

number = "1-3",

}

TY - JOUR

T1 - Characteristics of organic electroluminescent devices using polypyrrole conducting layer

AU - Park, Jong Wook

AU - Lee, Jun Young

AU - Kho, Sam Ill

AU - Lee, Ho Sik

AU - Kim, Tae Wan

PY - 2001/2/15

Y1 - 2001/2/15

N2 - We observed EL properties based on PVK, poly(3,6-N-2-ethylhexyl carbazolyl cyanoterephthalidene) (PECCP) and Alq3 emitting material devices with doped PPy conducting layer (>5 S/cm) and undoped polyacetylene derivative layer (PEPB, 10-10-10-11 S/cm) on top of rough ITO (surface resistance: less than 7Ω/□). PPy conducting layer improved an EL efficiency of ITO/TPD/Alq3/Al device, which has a rough ITO surface of more than 1000 angstroms peak to peak level. In PVK, PECCP EML device, when PPy is layered on top of ITO, the turn-on voltage is lowered from 13 to 10 V and from 15 to 9 V, respectively. The conductivity of undoped PEPB film is too low to improve EL property though it has good smoothness.

AB - We observed EL properties based on PVK, poly(3,6-N-2-ethylhexyl carbazolyl cyanoterephthalidene) (PECCP) and Alq3 emitting material devices with doped PPy conducting layer (>5 S/cm) and undoped polyacetylene derivative layer (PEPB, 10-10-10-11 S/cm) on top of rough ITO (surface resistance: less than 7Ω/□). PPy conducting layer improved an EL efficiency of ITO/TPD/Alq3/Al device, which has a rough ITO surface of more than 1000 angstroms peak to peak level. In PVK, PECCP EML device, when PPy is layered on top of ITO, the turn-on voltage is lowered from 13 to 10 V and from 15 to 9 V, respectively. The conductivity of undoped PEPB film is too low to improve EL property though it has good smoothness.

UR - https://www.scopus.com/pages/publications/0035247931

U2 - 10.1016/S0379-6779(00)00550-6

DO - 10.1016/S0379-6779(00)00550-6

M3 - Article

AN - SCOPUS:0035247931

SN - 0379-6779

VL - 117

SP - 119

EP - 122

JO - Synthetic Metals

JF - Synthetic Metals

IS - 1-3

ER -

Characteristics of organic electroluminescent devices using polypyrrole conducting layer

Abstract

Access to Document

Other files and links

Fingerprint

Cite this