Skip to main navigation Skip to search Skip to main content

Catalytic conversion of particle board over microporous catalysts

  • Suek Joo Choi
  • , Sung Hoon Park
  • , Jong Ki Jeon
  • , In Gu Lee
  • , Changkook Ryu
  • , Dong Jin Suh
  • , Young Kwon Park
  • University of Seoul
  • Sunchon National University
  • Kongju National University
  • Korea Institute of Energy Research
  • Korea Institute of Science and Technology

Research output: Contribution to journalArticlepeer-review

Abstract

Catalytic pyrolysis of particle board, a type of waste wood that is increasingly produced all over the world, was carried out over three types of zeolite catalysts: HBETA, HZSM-5, and Ga-impregnated HZSM-5 (Ga/HZSM-5). Experiments conducted using a batch reactor showed that the bio-oil yield and gas yield in catalytic pyrolysis were lower and higher than those in non-catalytic pyrolysis, respectively. Analysis of the bio-oil using pyrolysis gas chromatography/mass spectrometry (Py-GC/MS) showed that the yields of high-value-added species such as aromatics and phenolics were increased to a large extent by catalytic upgrading, thus increasing the value of the product bio-oil. In particular, HZSM-5 exhibited high selectivity for aromatic compounds, and impregnation of Ga further increased the selectivity. HBETA could cause levoglucosans to decompose completely owing to its large pore size, resulting in increased yields of low-molecular-mass species.

Original languageEnglish
Pages (from-to)105-110
Number of pages6
JournalRenewable Energy
Volume54
DOIs
StatePublished - Jun 2013

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • Catalyst
  • Particle board
  • Py-GC/MS
  • Pyrolysis
  • Waste biomass

Fingerprint

Dive into the research topics of 'Catalytic conversion of particle board over microporous catalysts'. Together they form a unique fingerprint.

Cite this