An inductive-coupling link with a complementary switching transmitter and an integrating receiver

Youngkyun Jeong; Hyun Ki Kim; Sang Hoon Kim; Kee Won Kwon; Jung Hoon Chun

doi:10.5573/JSTS.2014.14.2.227

An inductive-coupling link with a complementary switching transmitter and an integrating receiver

Youngkyun Jeong
, Hyun Ki Kim
, Sang Hoon Kim
, Kee Won Kwon
, Jung Hoon Chun

Department of Semiconductor Systems Engineering

Research output: Contribution to journal › Article › peer-review

Abstract

A transceiver for a high-speed inductive coupling link is proposed. The bi-phase modulation (BPM) signaling scheme is used due to its good noise immunity. The transmitter utilizes a complementary switching method to remove glitches in transmitted data. To increase the timing margin on the receiver side, an integrating receiver with a pre-charging equalizer is employed. The proposed transceiver was implemented via a 130-nm CMOS process. The measured timing window for a 10^-12 bit error rate (BER) at 1.8 Gb/s was 0.33 UI.

Original language	English
Pages (from-to)	227-234
Number of pages	8
Journal	Journal of Semiconductor Technology and Science
Volume	14
Issue number	2
DOIs	https://doi.org/10.5573/JSTS.2014.14.2.227
State	Published - 2014

Keywords

Bi-phase modulation
BPM
Complementary switching
Inductive link
Integrating receiver

Access to Document

10.5573/JSTS.2014.14.2.227

Cite this

@article{4592a2c87fe5495897889c5b95dea38d,

title = "An inductive-coupling link with a complementary switching transmitter and an integrating receiver",

abstract = "A transceiver for a high-speed inductive coupling link is proposed. The bi-phase modulation (BPM) signaling scheme is used due to its good noise immunity. The transmitter utilizes a complementary switching method to remove glitches in transmitted data. To increase the timing margin on the receiver side, an integrating receiver with a pre-charging equalizer is employed. The proposed transceiver was implemented via a 130-nm CMOS process. The measured timing window for a 10-12 bit error rate (BER) at 1.8 Gb/s was 0.33 UI.",

keywords = "Bi-phase modulation, BPM, Complementary switching, Inductive link, Integrating receiver",

author = "Youngkyun Jeong and Kim, \{Hyun Ki\} and Kim, \{Sang Hoon\} and Kwon, \{Kee Won\} and Chun, \{Jung Hoon\}",

year = "2014",

doi = "10.5573/JSTS.2014.14.2.227",

language = "English",

volume = "14",

pages = "227--234",

journal = "Journal of Semiconductor Technology and Science",

issn = "1598-1657",

publisher = "Institute of Electronics Engineers of Korea",

number = "2",

}

TY - JOUR

T1 - An inductive-coupling link with a complementary switching transmitter and an integrating receiver

AU - Jeong, Youngkyun

AU - Kim, Hyun Ki

AU - Kim, Sang Hoon

AU - Kwon, Kee Won

AU - Chun, Jung Hoon

PY - 2014

Y1 - 2014

N2 - A transceiver for a high-speed inductive coupling link is proposed. The bi-phase modulation (BPM) signaling scheme is used due to its good noise immunity. The transmitter utilizes a complementary switching method to remove glitches in transmitted data. To increase the timing margin on the receiver side, an integrating receiver with a pre-charging equalizer is employed. The proposed transceiver was implemented via a 130-nm CMOS process. The measured timing window for a 10-12 bit error rate (BER) at 1.8 Gb/s was 0.33 UI.

AB - A transceiver for a high-speed inductive coupling link is proposed. The bi-phase modulation (BPM) signaling scheme is used due to its good noise immunity. The transmitter utilizes a complementary switching method to remove glitches in transmitted data. To increase the timing margin on the receiver side, an integrating receiver with a pre-charging equalizer is employed. The proposed transceiver was implemented via a 130-nm CMOS process. The measured timing window for a 10-12 bit error rate (BER) at 1.8 Gb/s was 0.33 UI.

KW - Bi-phase modulation

KW - BPM

KW - Complementary switching

KW - Inductive link

KW - Integrating receiver

UR - https://www.scopus.com/pages/publications/84900028459

U2 - 10.5573/JSTS.2014.14.2.227

DO - 10.5573/JSTS.2014.14.2.227

M3 - Article

AN - SCOPUS:84900028459

SN - 1598-1657

VL - 14

SP - 227

EP - 234

JO - Journal of Semiconductor Technology and Science

JF - Journal of Semiconductor Technology and Science

IS - 2

ER -

An inductive-coupling link with a complementary switching transmitter and an integrating receiver

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this