All printed edge-triggered register using single walled carbon nanotube-based thin film transistor

Jinsoo Noh; Minhun Jung; Kyunghwan Jung; Gwangyong Lee; Soyeon Lim; Daae Kim; Vivek Subramanian; Gyoujin Cho

doi:10.1166/jnn.2012.5933

All printed edge-triggered register using single walled carbon nanotube-based thin film transistor

Jinsoo Noh
, Minhun Jung
, Kyunghwan Jung
, Gwangyong Lee
, Soyeon Lim
, Daae Kim
, Vivek Subramanian
, Gyoujin Cho

Research output: Contribution to journal › Article › peer-review

4 Scopus citations

Abstract

We have studied the fabrication of Single Walled Carbon Nanotube (SWNT)-based Thin Film Transistors (TFTs) using Roll-to-Roll (R2R) gravure printer and inkjet printer on PET foils to show the possibility of printed electronics in point of mass production and low cost. In this paper, for realization of all printed multi-bits digital circuit, all printed positive-edge triggered master-slave D flip-flop (DFF) was fabricated on PET foil using printed SWNT TFTs. The printed DFF, consists of 8 NAND gates and 4 inverters, exhibit propagation delay of 75 ms at the input clock signal of 5 Hz.

Original language	English
Pages (from-to)	4261-4264
Number of pages	4
Journal	Journal of Nanoscience and Nanotechnology
Volume	12
Issue number	5
DOIs	https://doi.org/10.1166/jnn.2012.5933
State	Published - 2012
Externally published	Yes

Keywords

Edge-Triggered Register
Electronics Inks
Printed Electronics
SWNT-TFT

Access to Document

10.1166/jnn.2012.5933

Cite this

@article{34d3e4e07eb9480590887ff2e3dfb1aa,

title = "All printed edge-triggered register using single walled carbon nanotube-based thin film transistor",

abstract = "We have studied the fabrication of Single Walled Carbon Nanotube (SWNT)-based Thin Film Transistors (TFTs) using Roll-to-Roll (R2R) gravure printer and inkjet printer on PET foils to show the possibility of printed electronics in point of mass production and low cost. In this paper, for realization of all printed multi-bits digital circuit, all printed positive-edge triggered master-slave D flip-flop (DFF) was fabricated on PET foil using printed SWNT TFTs. The printed DFF, consists of 8 NAND gates and 4 inverters, exhibit propagation delay of 75 ms at the input clock signal of 5 Hz.",

keywords = "Edge-Triggered Register, Electronics Inks, Printed Electronics, SWNT-TFT",

author = "Jinsoo Noh and Minhun Jung and Kyunghwan Jung and Gwangyong Lee and Soyeon Lim and Daae Kim and Vivek Subramanian and Gyoujin Cho",

year = "2012",

doi = "10.1166/jnn.2012.5933",

language = "English",

volume = "12",

pages = "4261--4264",

journal = "Journal of Nanoscience and Nanotechnology",

issn = "1533-4880",

publisher = "American Scientific Publishers",

number = "5",

}

TY - JOUR

T1 - All printed edge-triggered register using single walled carbon nanotube-based thin film transistor

AU - Noh, Jinsoo

AU - Jung, Minhun

AU - Jung, Kyunghwan

AU - Lee, Gwangyong

AU - Lim, Soyeon

AU - Kim, Daae

AU - Subramanian, Vivek

AU - Cho, Gyoujin

PY - 2012

Y1 - 2012

N2 - We have studied the fabrication of Single Walled Carbon Nanotube (SWNT)-based Thin Film Transistors (TFTs) using Roll-to-Roll (R2R) gravure printer and inkjet printer on PET foils to show the possibility of printed electronics in point of mass production and low cost. In this paper, for realization of all printed multi-bits digital circuit, all printed positive-edge triggered master-slave D flip-flop (DFF) was fabricated on PET foil using printed SWNT TFTs. The printed DFF, consists of 8 NAND gates and 4 inverters, exhibit propagation delay of 75 ms at the input clock signal of 5 Hz.

AB - We have studied the fabrication of Single Walled Carbon Nanotube (SWNT)-based Thin Film Transistors (TFTs) using Roll-to-Roll (R2R) gravure printer and inkjet printer on PET foils to show the possibility of printed electronics in point of mass production and low cost. In this paper, for realization of all printed multi-bits digital circuit, all printed positive-edge triggered master-slave D flip-flop (DFF) was fabricated on PET foil using printed SWNT TFTs. The printed DFF, consists of 8 NAND gates and 4 inverters, exhibit propagation delay of 75 ms at the input clock signal of 5 Hz.

KW - Edge-Triggered Register

KW - Electronics Inks

KW - Printed Electronics

KW - SWNT-TFT

UR - https://www.scopus.com/pages/publications/84863965914

U2 - 10.1166/jnn.2012.5933

DO - 10.1166/jnn.2012.5933

M3 - Article

AN - SCOPUS:84863965914

SN - 1533-4880

VL - 12

SP - 4261

EP - 4264

JO - Journal of Nanoscience and Nanotechnology

JF - Journal of Nanoscience and Nanotechnology

IS - 5

ER -

All printed edge-triggered register using single walled carbon nanotube-based thin film transistor

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this