A study on the fault characteristics of line fault in LVDC distribution system

Joon Han; Yun Sik Oh; Gi Hyeon Gwon; Doo Ung Kim; Chul Hwan Kim; Keon Woo Park

doi:10.1049/cp.2014.0091

A study on the fault characteristics of line fault in LVDC distribution system

Joon Han
, Yun Sik Oh
, Gi Hyeon Gwon
, Doo Ung Kim
, Chul Hwan Kim
, Keon Woo Park

Department of Electronic and Electrical Engineering

Sungkyunkwan University
KDPower Co., Ltd

Research output: Contribution to conference › Paper › peer-review

Abstract

Recently, the interest about Direct Current (DC) distribution system has been increasing constantly as the importance and need to renewable resources are emphasized. In common with existing AC system, especially, an analysis of fault in DC system is also important. However, fault in DC system might have different characteristic compared with conventional AC system due to the difference in configuration between two systems. This paper analyses the fault characteristic in DC distribution system considering two types of line faults. For the analysis, a simple DC distribution system is implemented using EMTP/ATPDraw. And then, the simulation according to the various fault conditions is conducted and the simulation results are presented.

Original language	English
Pages	12.09
DOIs	https://doi.org/10.1049/cp.2014.0091
State	Published - 2014
Event	12th IET International Conference on Developments in Power System Protection, DPSP 2014 - Copenhagen, Denmark Duration: 31 Mar 2014 → 3 Apr 2014

Conference

Conference	12th IET International Conference on Developments in Power System Protection, DPSP 2014
Country/Territory	Denmark
City	Copenhagen
Period	31/03/14 → 3/04/14

Keywords

EMTP
Line fault
Low voltage DC distribution system

Access to Document

10.1049/cp.2014.0091

Cite this

@conference{7dd46a0702d44e13a7d8079d0217b43a,

title = "A study on the fault characteristics of line fault in LVDC distribution system",

abstract = "Recently, the interest about Direct Current (DC) distribution system has been increasing constantly as the importance and need to renewable resources are emphasized. In common with existing AC system, especially, an analysis of fault in DC system is also important. However, fault in DC system might have different characteristic compared with conventional AC system due to the difference in configuration between two systems. This paper analyses the fault characteristic in DC distribution system considering two types of line faults. For the analysis, a simple DC distribution system is implemented using EMTP/ATPDraw. And then, the simulation according to the various fault conditions is conducted and the simulation results are presented.",

keywords = "EMTP, Line fault, Low voltage DC distribution system",

author = "Joon Han and Oh, \{Yun Sik\} and Gwon, \{Gi Hyeon\} and Kim, \{Doo Ung\} and Kim, \{Chul Hwan\} and Park, \{Keon Woo\}",

year = "2014",

doi = "10.1049/cp.2014.0091",

language = "English",

pages = "12.09",

note = "12th IET International Conference on Developments in Power System Protection, DPSP 2014 ; Conference date: 31-03-2014 Through 03-04-2014",

}

TY - CONF

T1 - A study on the fault characteristics of line fault in LVDC distribution system

AU - Han, Joon

AU - Oh, Yun Sik

AU - Gwon, Gi Hyeon

AU - Kim, Doo Ung

AU - Kim, Chul Hwan

AU - Park, Keon Woo

PY - 2014

Y1 - 2014

N2 - Recently, the interest about Direct Current (DC) distribution system has been increasing constantly as the importance and need to renewable resources are emphasized. In common with existing AC system, especially, an analysis of fault in DC system is also important. However, fault in DC system might have different characteristic compared with conventional AC system due to the difference in configuration between two systems. This paper analyses the fault characteristic in DC distribution system considering two types of line faults. For the analysis, a simple DC distribution system is implemented using EMTP/ATPDraw. And then, the simulation according to the various fault conditions is conducted and the simulation results are presented.

AB - Recently, the interest about Direct Current (DC) distribution system has been increasing constantly as the importance and need to renewable resources are emphasized. In common with existing AC system, especially, an analysis of fault in DC system is also important. However, fault in DC system might have different characteristic compared with conventional AC system due to the difference in configuration between two systems. This paper analyses the fault characteristic in DC distribution system considering two types of line faults. For the analysis, a simple DC distribution system is implemented using EMTP/ATPDraw. And then, the simulation according to the various fault conditions is conducted and the simulation results are presented.

KW - EMTP

KW - Line fault

KW - Low voltage DC distribution system

UR - https://www.scopus.com/pages/publications/84901400447

U2 - 10.1049/cp.2014.0091

DO - 10.1049/cp.2014.0091

M3 - Paper

AN - SCOPUS:84901400447

SP - 12.09

T2 - 12th IET International Conference on Developments in Power System Protection, DPSP 2014

Y2 - 31 March 2014 through 3 April 2014

ER -

A study on the fault characteristics of line fault in LVDC distribution system

Abstract

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this