A solid state actuator based on polypyrrole (PPy) and a solid electrolyte NBR working in air

M. S. Cho; J. D. Nam; H. R. Choi; J. C. Koo; Y. Lee

doi:10.1117/12.602275

A solid state actuator based on polypyrrole (PPy) and a solid electrolyte NBR working in air

M. S. Cho, J. D. Nam, H. R. Choi, J. C. Koo, Y. Lee

Department of Mechanical Engineering

Polymer Technology Institute

Research output: Contribution to journal › Conference article › peer-review

3 Scopus citations

Abstract

The solid polymer electrolyte based conducting polymer actuator was presented In the preparation of acutuator module, an ionic liquid impregnated a synthetic rubber (NBR) and PPy were used as a solid polymer electrolyte and conducting polymer, respectively. An ionic liquid, 1-butyl-3-methylimidazolium bis (trifluoromethyl sulfonyl)imide (BMITFSI) is gradually dispersed into the NBR film and the conducting polymer, PPy was synthesized on the surface of NBR. The ionic conductivity of new type solid polymer electrolyte as a function of the immersion time was investigated. The cyclic voltammetry responsed and the redox switching dynamics of PEDOT in NBR matrix were studied. The displacement of the actuator was measured by laser beam.

Original language	English
Article number	83
Pages (from-to)	534-539
Number of pages	6
Journal	Proceedings of SPIE - The International Society for Optical Engineering
Volume	5759
DOIs	https://doi.org/10.1117/12.602275
State	Published - 2005
Event	Smart Structures and Materials 2005 - Electroactive Polymer Actuators and Devices (EAPAD) - San Diego, CA, United States Duration: 7 Mar 2005 → 10 Mar 2005

Keywords

Actuator
Conducting polymer
Ionic liquid
NBR
Polypyrrole

Access to Document

10.1117/12.602275

Cite this

@article{ed7deddc08c2441abc8850c1c0352f3c,

title = "A solid state actuator based on polypyrrole (PPy) and a solid electrolyte NBR working in air",

abstract = "The solid polymer electrolyte based conducting polymer actuator was presented In the preparation of acutuator module, an ionic liquid impregnated a synthetic rubber (NBR) and PPy were used as a solid polymer electrolyte and conducting polymer, respectively. An ionic liquid, 1-butyl-3-methylimidazolium bis (trifluoromethyl sulfonyl)imide (BMITFSI) is gradually dispersed into the NBR film and the conducting polymer, PPy was synthesized on the surface of NBR. The ionic conductivity of new type solid polymer electrolyte as a function of the immersion time was investigated. The cyclic voltammetry responsed and the redox switching dynamics of PEDOT in NBR matrix were studied. The displacement of the actuator was measured by laser beam.",

keywords = "Actuator, Conducting polymer, Ionic liquid, NBR, Polypyrrole",

author = "Cho, \{M. S.\} and Nam, \{J. D.\} and Choi, \{H. R.\} and Koo, \{J. C.\} and Y. Lee",

year = "2005",

doi = "10.1117/12.602275",

language = "English",

volume = "5759",

pages = "534--539",

journal = "Proceedings of SPIE - The International Society for Optical Engineering",

issn = "0277-786X",

publisher = "SPIE",

note = "Smart Structures and Materials 2005 - Electroactive Polymer Actuators and Devices (EAPAD) ; Conference date: 07-03-2005 Through 10-03-2005",

}

TY - JOUR

T1 - A solid state actuator based on polypyrrole (PPy) and a solid electrolyte NBR working in air

AU - Cho, M. S.

AU - Nam, J. D.

AU - Choi, H. R.

AU - Koo, J. C.

AU - Lee, Y.

PY - 2005

Y1 - 2005

N2 - The solid polymer electrolyte based conducting polymer actuator was presented In the preparation of acutuator module, an ionic liquid impregnated a synthetic rubber (NBR) and PPy were used as a solid polymer electrolyte and conducting polymer, respectively. An ionic liquid, 1-butyl-3-methylimidazolium bis (trifluoromethyl sulfonyl)imide (BMITFSI) is gradually dispersed into the NBR film and the conducting polymer, PPy was synthesized on the surface of NBR. The ionic conductivity of new type solid polymer electrolyte as a function of the immersion time was investigated. The cyclic voltammetry responsed and the redox switching dynamics of PEDOT in NBR matrix were studied. The displacement of the actuator was measured by laser beam.

AB - The solid polymer electrolyte based conducting polymer actuator was presented In the preparation of acutuator module, an ionic liquid impregnated a synthetic rubber (NBR) and PPy were used as a solid polymer electrolyte and conducting polymer, respectively. An ionic liquid, 1-butyl-3-methylimidazolium bis (trifluoromethyl sulfonyl)imide (BMITFSI) is gradually dispersed into the NBR film and the conducting polymer, PPy was synthesized on the surface of NBR. The ionic conductivity of new type solid polymer electrolyte as a function of the immersion time was investigated. The cyclic voltammetry responsed and the redox switching dynamics of PEDOT in NBR matrix were studied. The displacement of the actuator was measured by laser beam.

KW - Actuator

KW - Conducting polymer

KW - Ionic liquid

KW - NBR

KW - Polypyrrole

UR - https://www.scopus.com/pages/publications/25144493189

U2 - 10.1117/12.602275

DO - 10.1117/12.602275

M3 - Conference article

AN - SCOPUS:25144493189

SN - 0277-786X

VL - 5759

SP - 534

EP - 539

JO - Proceedings of SPIE - The International Society for Optical Engineering

JF - Proceedings of SPIE - The International Society for Optical Engineering

M1 - 83

T2 - Smart Structures and Materials 2005 - Electroactive Polymer Actuators and Devices (EAPAD)

Y2 - 7 March 2005 through 10 March 2005

ER -

A solid state actuator based on polypyrrole (PPy) and a solid electrolyte NBR working in air

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this