Skip to main navigation Skip to search Skip to main content

A Ll-band RF receiver for GPS application in 0.13um CMOS technology

  • Hoohyun Cho
  • , Young Gun Pu
  • , Sangwoo Kim
  • , Youngsin Kim
  • , Kang Yoon Lee
  • , Sunjun Ko
  • , Heonchul Park

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

Abstract

This paper presents a Ll-Band RF receiver for GPS application in 0.13um CMOS technology. The receiver is based on a 4.092MHz low-IF architecture to alleviate the DC-offset problem. It includes a low-nose amplifier (LNA), a down-conversion mixer, a bandpass filter, and variable gain amplifier (VGA). The gain of VGA is controlled digitally by the digital gain controller and the total dynamic range of th baseband part is 60dB. The fractional-N frequency synthesizer with sigma-delta modulator is used to allow multiple reference clock frequencies. The phase noise is -123dB/Hz at 1MHz offset. The whole receiver dissipates 45mW with 1.2V supply. And the system noise figure(NF)is4dB.

Original languageEnglish
Title of host publication2008 International SoC Design Conference, ISOCC 2008
PagesI433-I436
DOIs
StatePublished - 2008
Externally publishedYes
Event2008 International SoC Design Conference, ISOCC 2008 - Busan, Korea, Republic of
Duration: 24 Nov 200825 Nov 2008

Publication series

Name2008 International SoC Design Conference, ISOCC 2008
Volume1

Conference

Conference2008 International SoC Design Conference, ISOCC 2008
Country/TerritoryKorea, Republic of
CityBusan
Period24/11/0825/11/08

Keywords

  • CMOS
  • Frequency synthesizer
  • GPS
  • RF receiver
  • VGA

Fingerprint

Dive into the research topics of 'A Ll-band RF receiver for GPS application in 0.13um CMOS technology'. Together they form a unique fingerprint.

Cite this